| Displacement cc/rev: | 6 - 47.6 |
| Gear Widths: | 1/4" - 2" |
| Max PSI / BAR: | 2000 / 138 |
| RPM: | 400 - 2000 |
M1500 Series
M1500 Series
The M1500 series is a small displacement, roller bearing gear motor from Permco.
Free Technical Downloads
Permco 1500 Data Sheet Permco 1500 Codebook
Product Overview
The Permco M1500 is a small frame sized, hydraulic roller bearing gear motor.
The 1500 series allows the option for a smaller displacement in a roller bearing unit.
A high pressure shaft bushing is also available if required.
The M1500 series gear motor is built from cast iron ensuring a strong and long lasting product, which can stand the most robust applications. Single & multiple units are available as per your requirements.
The pressure loaded wear plates of the motor, provides you with a high efficient product.
A wide range of configurable mounting, shaft and porting options are available to suit your unique requirements.
Compatible with Mineral Oil, Water Glycol, Invert Emulsion & Fire Resistant fluids.
Spare parts available from stock, such as seal kits, flanges, shafts and individual pump sections enabling a fast turnaround for you if required.
Our Service to you
We machine, build from stock and test the M1500 gear motor on site, to ensure the highest quality and a workable product is delivered to you. The M1500 gear motor also comes with a 12 month warranty.
We aim to always supply the best competitive price for this product. Your welcome to provide us with a guide price to see if we can price match it.
In the event your product breaks down in the first 12 months, please CONTACT US so we can discuss your warranty rights with you.
In the event of an emergency or you have a machine breakdown; we can supply this product to you with a 24 / 48 turnaround.
Common Applications
Customers of ours have used this gear motor in applications such as:
- Wind Turbines
But can be applied to a wide range of mobile machinery within a variety of industries.
ATEX Information
The M1500 can be supplied as an ATEX gear motor if required. ATEX Group I & II approval is required, if the product will be used in potentially explosive atmospheres.
ATEX gear motors are ideally suited for applications in the mining, oil & gas industry.
Mounting, Drive Shaft, Porting Options
Product Coding Example
Pump Performance
Recommended Operating Conditions
- Fluid viscosity, normal operating conditions 9 – 220 cst.
- Fluid temperature should not exceed 82 deg C for mineral oil or 57 deg. C for water glycol.
- Fluid cleanliness, 10 micron filter with Beta 200 rating is recommended.
- Inlet pressure; for best operation with mineral oil, pressure should not exceed minus 0.237 BAR (7 in HG) or with water glycol, minus 0.101 BAR (3 in HG)
Weights & Dimensions
