M5000 / 5100 Series

M5000 / 5100 Series
Displacement cc/rev: 21 - 115.9
Gear Widths: 1/2" - 2.3/4"
Max PSI / BAR: 2500 / 172
RPM: 400 - 2000

The M5000 / 5100 series is a medium displacement, roller bearing gear motor from Permco.


Free Technical Downloads


Permco 5000-5100 Data Sheet   Permco 5000-5100 Codebook

Product Overview


The Permco M5000 / 5100 is a medium frame sized, hydraulic roller bearing gear motor.

The M5000 / 5100 series gear motor is built from cast iron ensuring a strong and long lasting product, which can stand the most robust applications. Single & multiple units are available as per your requirements.

Viton and severe duty seals are available if required.

A wide range of different displacements are available for the M5000 / 5100 series.

The pressure loaded wear plates of the motor, provides you with a high efficient product.

A wide range of configurable mounting, shaft and porting options are available to suit your unique requirements.

Compatible with Mineral Oil, Water Glycol, Invert Emulsion & Fire Resistant fluids.

Spare parts available from stock, such as seal kits, flanges, shafts and individual motor sections enabling a fast turnaround for you if required.


Our Service to you


We machine, build from stock and test the M5000 / 5100 gear motors on site, to ensure the highest quality and that a workable product is delivered to you. The M5000 / 5100 gear motor also comes with a 12 month warranty.

We aim to always supply the best competitive price for this product. Your welcome to provide us with a guide price to see if we can price match it.

In the event your product breaks down in the first 12 months, please CONTACT US so we can discuss your warranty rights with you.

In the event of an emergency or you have a machine breakdown; we can supply this product to you with a 24 / 48 turnaround.


Common Applications


Customers of ours have used this gear motor in applications such as:

  • Lifting applications

But can be applied to a wide range of mobile machinery within a variety of industries.


ATEX Information

The M5000 / 5100 can be supplied as an ATEX gear pump if required. ATEX Group I & II certification is required, if the product will be used in potentially explosive atmospheres.

ATEX gear motors are ideally suited for applications in the mining, oil & gas industry.


Mounting, Drive Shaft, Porting Options



Product Coding Example



Pump Performance



Recommended Operating Conditions


  • Fluid viscosity, normal operating conditions 16 – 220 cst.
  • Fluid temperature should not exceed 65 deg C.
  • Fluid cleanliness, 10 micron filter with Beta 200 rating is recommended.
  • Inlet pressure; for best operation with mineral oil, pressure should not exceed minus 0.237 BAR (7 in HG).

Weights & Dimensions